(518) 753-4456 info@stephenbader.com
Bader Space Saver shown with Belt Guard required by OSHA and supplied with the machine.
Bader Space Saver shown with hinged angle plate permits user to lay machine on side for polishing long parts which are cumbersome and fatiguing to handle vertically. Lock-in fork and bearing hubs are required to set this up.
Space Save HDBJY Arm with V-Belt to support abrasive belt for aggressive slack belt grinding and polishing.Sheaves are mounted on HD BJ hubs.
Space Saver with belt guard removed to show detail
Space Saver fork arm for use with 2" wide contact wheels from 9/16" to 3" OD.
Space Saver BJ Arm straight
Space Saver BJ Arm curved with billy roll
Bader Space Saver shown with HD BJY Arm and Belt
Bader Space Saver shown with BJY Arm and Belt
Bader Space Saver shown with Belt Guard required by OSHA and supplied with the machine.

Bader Space Saver

Call for Price

The most versatile belt grinding and polishing machine on the market.

Its reliability, ease of maintenance and ruggedness are what you need in production environment.

Whether you’re hogging off material quickly with a coarse grit belt or putting a fine finish on jet blades, surgical implements or hand tools, the Bader Space Saver is built with speed and versatility in mind. Change the contact wheel or attachments to process any part quickly and efficiently. It easily pivots on its base, raises to standing height or lowers to your chair.

Its patented tracking system accurately tracks belts over soft buff or conventional rubber contact wheels from 1/8” to 3” wide and over shaped or flat-faced contact wheels from 1/2” to 18”.

 

Category:

Description

Drive pulleys are available to yield any desired belt speed from 1500 to 9000 SFPM. The OD may be used interchangeably with a constant belt speed and 132-inch belt length. The rear-mounted motor and recessed base leave the top, bottom and sides free of the obstructions common to typical backstand machines.

Standard machines are powered by a 2 or 5 HP 3ph 3450 RPM TEFC motor. Variable speed with E-stop and brake and single-phase, single-speed motors are commonly selected options. Special machines and accessories for use with belts up to 6” wide and motors up to 20 HP are also available. Optional equipment includes variable speed with E-stop and brake, air-tensioning, work rest tables and idler pulley tracking.

A mobile grinder complete with 5HP 230-460 volt 3450 RPM TEFC motor, lock-in flanges, belt guard and depth guide wheels, less contact wheel runs $5175.00

Equipped for use with belts 132” long and 1/4” to 3” wide, included as standard equipment.
For a machine designed for use with belts up to 4” wide, add $335.00

Machine prices include OSHA-required belt guard

Additional information

Height

66"
Width

20"
Depth

41"
Weight

350 pounds
HP

2.5 or 7.5
Voltage

230/460, 3ph. 110/220 1ph
Belt speeds

1500-9000 SFPM
Contact wheel diameter

9/16” to 18”
Contact wheel width

up to 3”
Belt width

1/4” to 3”
Belt length

132
Custom widths

up to 6” wide

Motor Options

2HP 3450 RPM 230-460 volt 3 phase TEFC motor $4,625
5HP 3450 RPM 230-460 volt 3 phase TEFC motor $5150
2HP 3450 RPM 110-220 volt single-phase TEFC motor $4,625
2 HP with Nema 4 variable speed control for 220 single phase or 230 volt three phase $5,460
2 HP with Nema 4 variable speed control for 460/480 volt three phase $5,575
5 HP with Nema 4 variable speed control for 230 volt three phase $7,260
5 HP with Nema 4 variable speed control for 460/480 volt three phase $7,370
2 HP digital variable speed with e-stop and brake three phase Quoted on request
5 HP digital variable speed with e-stop and brake three phase Quoted on request
7 1/2, 10 HP and explosion-proof motors for special applications Quoted on request

Machine prices include OSHA-required belt guard

You may also like…

Related products